PRODUCTS

DVI Cable

DVI-2Y(St)CH-4P/1P/3C-24

• (4P+1P+3C)

Construction

 Element 1:4 PR×24AWG(Stranded TC/Foam PE/Individual Al-mylar Screen+ TC Drain Wire)

• Conductors	Stranded tinned copper wires, 7/0.20mm
  Insulation	Foam Polyethylene. Thickness 0.28mm. Outer diameter 1.16+0.05mm
  Core Identification	1P= White/Brown; 2P=White/Red; 3P=White/Green; 4P=White/Blue
  Twisting	The cores shall twisted together in pair, the lay between each twist shall not exceed 100 mm
  Individual Shield	Aluminum/mylar laminated tape applied with the metallic side down in electrical contact with a 24AWG tinned copper drain wire (7 strands formation). A mylar tape is applied over the screening tape with a minimum 25% overlap. Thickness ≥0.05mm.

 Element 2: 1PR×24AWG(7/0.2mm) Stranded TC/Foam PE

• Conductors	Stranded annealed tinned copper wire, 7/0.20mm
  Insulation	Foam polyethylene. Thickness 0.15mm. Outer diameter 0.9mm
  Insulation Color	Yellow/Orange
  Twisting	The cores shall twisted together in pair, the lay between each twist shall not exceed 100 mm

 Element 3: 3C×24AWG(7/0.2mm) Stranded TC/Foam PE

• Conductors	Stranded annealed tinned copper wire, 7/0.20mm
  Insulation	Foam polyethylene. Thickness 0.15mm. Outer diameter 0.9mm
  Insulation Color	Red/Violet/White

 Element Assembly

• Overall Screen	Aluminum/mylar tape. Thickness ≥0.05mm. Overlap > 25%
  Braid Shield	Braid of tinned copper wire (0.12mm)+Wrapping tape. Coverage: 85-95% Wrapping tape is optional.
  Outer Sheath	LSOH sheath,Thickness 1.0mm. Outer diameter is 10.4mm Approx. Net Weight: 133kg/km
  Sheath Color	Black

Physical Properties:

Temperature rating: -25°C to +80°C

Minimum bending radius: 3 x Overall Diameter 

Electrical Properties:

• Rated Voltage	30V
  Max conductor resistance at 20°C	≤89.2 Ohm/Km
  Min insulation resistance	≥100M Ohm/m
  Spark test	Min. AC 250V/1 second
  Nom. mutual capacitance at 1KHz	57 pF/m

Fire Performance in General :

• EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2)	Vertical flame propogation for a single insulated wire or cable
  EN 50266-2-4 + EN 50305; IEC 60332-3-24; NF C 32-070 2.2 (C1); VDE 0472 Teil 804	Vertical flame spread of vertically mounted bunched wires or cables
  EN 50268-2; IEC 61034-2; NF C 32-073 ; NF C 20-902; NF F 16 101; VDE 0472 Teil 816	Low Smoke Emission
  EN 50267-2-1; IEC 60754-1; NF C 32-074; NF C 20-454; VDE 0472 Teil 815	Halogen Free
  EN 50267-2-2/3; IEC 60754-2; NF C 32-074; NF C 20-453; VDE 0472 Teil 813	Low Corrosivity (Acidity & Conductivity)
  EN 50305; NF X 70-100; NF F 63 808; TM1-04; BS6853	Low Toxicity
  NF F 63 808; BS6853; NF F 16 101	Smoke index
  EN45545-2	Requirement for fire behavior of materials & components R15/R16

Fire Performance Relating to Rolling Stock Application

DIN 5510-2 

BS 6853

NF F16 101

NF F 63 808

EN 45545-2

Corona Resistant	Highly Flexible	UV Resistant	Ozone Resistant	Abrasion Retardant	Cold- resistant

 

Resistance To Soldering Heat	Acid&Alkaline Resistant	IRM 903 Fuel Oil Resistant	IRM 902 Mineral Oil Resistant	Fire Retardant NF C32-070-2.2(C2) IEC60332-3-24/EN50266-2-4	Flame Retardant NF C32-070-2.1(C1) IEC60332-1-2/EN50265-2-1

 

Low Toxicity NF X70-100/NF F63 808 TM1-04/BS 6853	Low Corrosivity IEC60754-2/EN50267-2-2/3 NF C32-074/VDE 0472-813	Low Smoke Emission IEC 61034-2 / EN 50268-2 NF C32-073/VDE 0472-816	Zero Halogen IEC 60754-1/EN 50267-2-1 NF C32-074//VDE 0472-815